The Classic Design

The Denali is a twin mezzanine Tiny Home with a larger bathroom and kitchen than most other models. The kitchen and bathroom are under the two mezzanine levels meaning they are at either end of the Tiny Home, rather than beside each other in most models. There is space for a washing machine in the bathroom, which features a stylish benchtop sink and birch ply cupboard space and extensive storage. Steam is eliminated in the bathroom with built-in showerdome to keep the moisture in and a full-size bathroom fan.

The kitchen extends down both sides of the Tiny Home offering plenty of countertop space and lovely bifold windows in front of the stainless-steel sink. A staircase accesses the main mezzanine level with a ladder accessing the other.

The Denali is 7.8m long, 2.5m wide and weighs in under the legal limit of 3,500KG. It can be towed by most recent model full-size Utes.

As with all our Tiny Home designs, we have never made the same model twice, as our clients add, change and modify the layout they like the best to create their perfect dream Tiny Home.

Purchase Options

$97,200 inc GST


Size - 27m2, 7.8m x 2.5m, footprint; roof height 3.5m internal to apex, 4.2m external to apex. Mezzanine area of 2.4m x 2.5m, with 2m clearance below. Effective floor area of 27m2, including mezzanines.


Timber style vinyl sheet, various colour choices available. 10 year warranty.


Brand new, double-glazed, made by Origin Windows.

Guttering and Spouting

Colour-matched Marley Stormcloud guttering system, featuring over-sized 80mm downspout.


8x double outlets (three have USB plugs), LED recessed and pendent interior downlights, and exterior light with motion sensor. RCD protected and 'caravan connection' . Comes with individual Certificate of Compliance and Electrical Warrant of Fitness (EWOF).


Combined Gas and Carbon Monoxide Alarm (hard wired), and a 10 Year Photoelectric Smoke Alarm.


Kitchen made in house from high end Birch clear finished ply as standard, built in Rangehood, Kwila Benchtops, three sets of cupboards, one set of draws, wall shelves, stainless steel sink, mixer tap, two power outlets.


Can be delivered anywhere on the North or South Island.


Built by a team lead by Adam Fox, NZ Licenced Building Practitioner.


All our Tiny Houses are designed from full 90mm galvanised steel framing which will not warp, hold moisture or rot. Its stronger and lighter than timber framing and unlike timber, is completely recyclable.


Standard Duragalv, or upgrade to hot dipped galvanised, twin or triple axle trailer, built in corner house jacks, spare wheel, registered, and 3-year Warrant of Fitness.


Coloursteel, trapezoid profile.


Our standard is Coloursteel corrugate profile, vertically fixed, but we can offer a range of cladding.

Exterior Fixings

Stainless steel or galvanized as required.


Floor – R1.4, Walls – R2.4, Ceilings – R3.9. For the steel framing thermal break, we go to ‘best practice’ above code and sheet the entire Tiny House with 10mm Expol polystyrene rather than the cheaper method of battens. All insulation is above NZ Building Code and the new Residential Tenancies Act standards, including the South Island and Alpine zone.


900 x 760 shower with showerdome to keep steam in, flushing toilet (other toilet options available) 460 x 220 to ground vanity, mirror, power outlet, powered vent to outside, space and hookups for washing machine.

Hot Water

16L Rheem LPG Gas Califont on demand hot water heater. All plumbing installed by a licenced plumber.

For a similar Tiny Home to the Denali check out the Aspiring Tiny Home. If you are looking for something more cost effective try out the Snowdon Tiny Home.

Talk to us about a custom design. Because every Tiny House is custom made to your specifications, we can adapt colours, windows, doors, interior linings, flooring, create off grid, and much more.

Contact our team now on 07-788-0101 or by using our contact form.